SRS4 Rewind

Max load 7,500 pounds (3402 kg)

As our most customizable Shifting Roll Stand (SRS4), this rugged unit can easily shift up to 7,500 lbs. (3402 kg). 

They come pre-piped, mounted on custom stands, and equipped with a dual raceway assembly using 1.0-inch, 
1.5-inch, or 2.0-inch. diameter race rods. 

This system is powered by an 8-inch diameter air cylinder with a stroke between 4-inch to 12-inch.

Each system features Montalvo tension control components and a continuous leaf core shaft.

A shifting idler roller is standard with all Unwind Stands to maintain a proper web plane through the sensor.

Perfect for industries with large and heavy weighted loads to process. 

Request a Quote Product Sheet (PDF)
Environment Applications
Web Path Configurations
Additional Equipment
Max Load 7500 lbs (2268 kgs) - Full roll weight + machine weight on linear bearings
Stroke Length(s) 4 in (102mm) to 12 in (305mm)
Auto Center Option Yes
Sensor Bracket Style 104
Air Consumption (at 6 psi) 1.8 CFM (51 l/m)
Tension Controls Open or Closed Loop
  • At least one fixed idler roller is attached to – and moves in unison with the unwind stand to keep the material on a constant plane through the air-flow sensor as the diameter of the unwinding roll decreases.
  • The air-flow sensor mounts to a stationary part of the machine-independent of the shifting stand and does not move during guiding.
  • Wash Down
  • Dusty, Dirty
  • High Heat
  • Clean Room
  • High Humidity
  • Explosion-Proof

Web Path Configurations

How to Specify

  • Center Guide
  • Stainless Steel Components
  • Remote Sensor Controls

Application Gallery

Related Guides