Menu

Auto Center Assembly Parts

Coast Controls offers spare parts for all of our web guides. Click on a category below or browse our list to find the part your system needs.


Back
to Top

ACAST

This standard Auto Center Assembly with a 3-way push/pull selector valve is for guides with R10 (1.0" shaft) or R75 (.75" shaft) raceways.

Used on various web guides including Steering Guides, Roll Stand Controls, Large Displacement Guides, Shifting Stands, and Retrofit Kits.

More Info
ACAST
ACASA

ACASA

This standard Auto Center fits on the R10 (1.0" shaft) or R75 (.75" shaft) raceways.

It is usually positioned at an angle so the orifice can read the edge of the carrier block, keeping the block centered on the raceway.

More Info

ACAMDRDG

The Auto Center assembly for MDG4, MDG5 & RDG5 web guides. Mounts to the face of the actuator.

More Info
ACAMDRDG
ACA3W

ACA3W

A 3-way push/pull Selector Valve device controls airflow to the Auto Center Assembly.

Used with the standard Auto Center or MDG/RDG web guide Auto Centers.

More Info

ACA3WK

A replacement plastic Selector Knob for the 3-way push/pull Selector Valve.

More Info
ACA3WK
Automatic Shut-Off

Automatic Shut-Off

MAC valve is used to automatically shut off the air supply to the guiding system when receiving an electronic signal from the operator station (PLC), E-Stop, or manual switch. 

Part# ACA3WMAC

3-Way MAC Valve replaces standard 3-Way Push/Pull Valve
Volts/HZ Watts
120/60 16.0
110/50 14.0
24 VDC 6.0
VAC to 150 PSI

More Info

ACA3WMAC-PKG

Part# ACA3WMAC-PKG


3-Way MAC Valve
Push/Pull Valve
Volts/HZ Watts
120/60 16.0
110/50 14.0
24 VDC 6.0
VAC to 150 PSI


A.  Illuminated On/Off Switch (illuminated when activated)
B.  Enclosure to house the On/Off Switch
C.  Enclosure to house the incoming and outgoing electrical to Valve and Switch
D.  30-Feet of 18 AWG - 3-wire (SJTOW Classification, 300V water resistant)

More Info
ACA3WMAC-PKG