Coast Controls offers spare parts for all of our web guides. Click on a category below or browse our list to find the part your system needs.
Model APCP30-X is a pneumatic cylinder with 3" bore. The "X" designation is for the stroke length (e.g. APCP30-3 has a stroke length of 3"). All cylinders come with push-lock fittings or optional brass barbed fittings. All components are constructed of anodized 6061-T6 aluminum. The connecting rod has a 7/16-20 UNF thread that comes with a locking nut.
*Note: To determine cylinder size for ordering measure two places, the outside length and the height of the end plate.
Model APCP40-X is a pneumatic cylinder with 4" bore. The "X" designation is for the stroke length (e.g. APCP40-3 has a stroke length of 3"). All cylinders come with push-lock fittings or optional brass barbed fittings. All components are constructed of anodized 6061-T6 aluminum. The connecting rod has a 7/16-20 UNF thread that comes with a locking nut.
*Note: To determine cylinder size for ordering measure two places, the outside length and the height of the end plate.
Model APCP50-X is a pneumatic cylinder with 5" bore. The "X" designation is for the stroke length (e.g. APCP50-3 has a stroke length of 3"). All cylinders come with push-lock fittings or optional brass barbed fittings. All components are constructed of anodized 6061-T6 aluminum. The connecting rod has a 7/16-20 UNF thread that comes with a locking nut.
*Note: To determine cylinder size for ordering measure two places, the outside length and the height of the end plate.
Model APCP60-X is a pneumatic cylinder with 6" bore. The "X" designation is for the stroke length (e.g. APCP60-3 has a stroke length of 3"). All cylinders come with push-lock fittings or optional brass barbed fittings. All components are constructed of anodized 6061-T6 aluminum. The connecting rod has a 7/16-20 UNF thread that comes with a locking nut.
*Note: To determine cylinder size for ordering measure two places, the outside length and the height of the end plate.
Model APCP80-X is a pneumatic cylinder with 8" bore. The "X" designation is for the stroke length (e.g. APCP80-3 has a stroke length of 3"). All cylinders come with push-lock fittings or optional brass barbed fittings. All components are constructed of anodized 6061-T6 aluminum. The connecting rod has a 7/16-20 UNF thread that comes with a locking nut.
*Note: To determine cylinder size for ordering measure two places, the outside length and the height of the end plate.
The ACCRK-PXX-XX Complete Repair Kit includes o-rings, glyd ring, rod gland seal, cylinder bore material and E-clip. This repair kit is for cylinders P30 through P60. The "X" designation is for the bore diameter and stroke (e.g. ACCRK-P50-3 has a bore diameter of 5" and a stroke of 3").