Menu

Air Flow Sensors Parts

Coast Controls offers spare parts for all of our web guides. Click on a category below or browse our list to find the part your system needs.


Back
to Top

AFS38

The AFS38 Features a .375" (9.525) sensor gap and is made from anodized 6061-T6 aluminum. Hard coat anodize and stainless steel are available. This sensor comes with push lock fittings for 1/4" I.D. hose or optional brass barbed fittings for 3/8" I.D braided hose. This is the most common sensor used.

More Info
AFS38
AFS50

AFS50

The AFS50 Features a .50" (12.7) sensor gap and is made from anodized 6061-T6 aluminum. Hard coat anodize and stainless steel are available. This sensor comes with push lock fittings for 1/4" I.D. hose or optional brass barbed fittings for 3/8" I.D braided hose.

More Info

AFS75

The AFS50 Features a .75" (19.05) sensor gap and is made from anodized 6061-T6 aluminum. Hard coat anodize and stainless steel are available. This sensor comes with push lock fittings for 1/4" I.D. hose or optional brass barbed fittings for 3/8" I.D braided hose.

More Info
AFS75
AFS100

AFS100

The AFS50 Features a 1.0" (25.4) sensor gap and is made from anodized 6061-T6 aluminum. Hard coat anodize and stainless steel are available. This sensor comes with push lock fittings for 1/4" I.D. hose or optional brass barbed fittings for 3/8" I.D braided hose.

More Info

AFS150

The AFS50 Features a 1.50" (38.1) sensor gap and is made from anodized 6061-T6 aluminum. Hard coat anodize and stainless steel are available. This sensor comes with push lock fittings for 1/4" I.D. hose or optional brass barbed fittings for 3/8" I.D braided hose.

More Info
AFS150
AFS38M

AFS38M

The AFS38M features a 3/8" (9.525) sensor gap. It is a miniature sensor used primarily on narrow web or tight fitting applications. This sensor is made from anodized 6061-T6 aluminum. Hard coat anodize and stainless steel are available. This sensor comes with push lock fittings for 1/4" I.D. hose or optional brass barbed fittings for 3/8" I.D braided hose.

More Info

AFS38MP

The AFS38MP features a 3/8" (9.525) sensor gap. It is a miniature sensor used primarily on narrow web or tight fitting applications. This sensor is made from anodized 6061-T6 aluminum. Hard coat anodize and stainless steel are available. This sensor comes with push lock fittings for 1/4" I.D. hose or optional brass barbed fittings for 3/8" I.D braided hose. This sensor is used for optional pneumatic piping configurations.

More Info
AFS38MP
AFS38M-KHS

AFS38M-KHS

The AFS38M-KHS features a 3/8" (9.525) sensor gap. It is a miniature sensor used primarily on narrow web or tight fitting applications. This sensor is made from anodized 6061-T6 aluminum. Hard coat anodize and stainless steel are available. This sensor comes with push lock fittings for 1/4" I.D. hose or optional brass barbed fittings for 3/8" I.D braided hose.

More Info

AFSFS1

The AFSFS1 Paddle Sensor is used when web materials are either too thick or porous to use with a stream of air and there is no problem with paddle marking contact with the webs edge. The paddles surface is plasma coated to prevent the sensor from premature wear.

More Info
AFSFS1
AFSFS1-PR

AFSFS1-PR

The AFSFS1-PR is a replacement stainless steel paddle for the FS1 with a smooth plasma coat covering.

More Info